Tag Archives: Protection

Ring Alarm Security 5-piece kit

"The ring alarm offers excellent home surveillance with a surprisingly low monthly fee."

• Affordable professional surveillance service

• Quick setup

• Backwards compatible with 1st generation hardware

• Solid range of accessories

• Needs better camera integration

The new ring alarm (second generation) starts at $ 200 for the five-part kit. However, there are several other kits and bundles to choose from. You can also add accessories later at any time if necessary.

Ring intends to make home security simple, easy and safe. Unlike traditional security systems that require professional installation, it is a do-it-yourself solution where you set everything up. However, Ring Alarm continues to offer 24-hour home surveillance to give homeowners another pair of eyes when they're not there.

What's new?

Basically nothing changes in the basic requirement of the new ring alarm. It is the same home improvement security system that consists of a base station, contact sensors, a motion detector, a keyboard and a range extender. They attach the contact sensors to doors, windows or other entry points throughout the house that then communicate with the base station and send warnings as soon as they are triggered.

John Velasco / Digital Trends

What is special about the new hardware is that Ring has reduced the size of each component by around 30%. For example, the keyboard is 38% smaller than its previous counterpart in the first generation system.

Despite the reduction, the sensors are not significantly smaller than those used in other systems such as SimpliSafe or Xfinitys Home Security. Ring is catching up instead of leading with a much smaller design.

Another important change concerns the batteries used by the sensors. The first generation version requires a 3 V lithium battery that is not as readily available as the new version CR2032 coin cell batteries. It's a boring detail, but you'll appreciate the change when it comes to replacing a battery.

Mix and match compatibility

If you happen to own the first generation ring alarm, you can mix and match the hardware to work with the new system, and vice versa. I'm glad to see that owners don't have to drop the old hardware when planning an upgrade. Interoperability is always a welcome relief as it helps maintain the value of the system over time.

It is always a welcome relief when there is interoperability.

Setting up is a breeze with the on-screen instructions in the Ring app. The base station can be connected directly to a router or wirelessly via WLAN. Placement at home is crucial, however, as the gateway communicates with the various sensors. There is also a range limitation for the sensors. For smaller places like my home, range is not a problem as everything is within 50 feet of the base station. Fortunately, the basic model of the ring alarm, the five-part kit, comes with a range extender that attaches an additional 250 feet.

After reclassifying the sensors, the entire setup process was completed in less than 30 minutes. If you need additional sensors, Ring offers a range of accessories to choose from – such as flood sensors, smoke and carbon monoxide sensors and more.

A lot of control, but could be smarter

In the Ring mobile app, you can access and change all settings of the Ring Alarm home security system. You can quickly activate and deactivate the system in the dashboard of the app by pressing the corresponding buttons. In a critical situation, I like how I can use the exclamation point button on the dashboard to quickly request help and trigger the alarm. The same controls are on the keyboard for quick access.

When I resort to some of the app's detailed controls, I find it useful that I can set the mode for each sensor. For example, I turned off the window sensors when they were in home mode, which prevents them from notifying me when I open or close them. At the same time, I switched off motion detection with my Ring Indoor Cam to prevent even more redundant notifications from being sent to me.

Conversely, when the system is activated in away mode, all sensors are monitored and set to trigger the alarm when triggered. Speaking of which, the base station sends out a deafening 104 dB siren that is more than loud to deter an intruder and hear my neighbors.

Although there are enough controls to customize the security system to my liking, it could be more intelligent. One complaint I have is that the alarm does not go off when my ring indoor camera detects motion in away mode, so it just sends the typical push notification instead.

Also, there doesn't seem to be an option to force the camera to turn on and shoot footage when one of the sensors is triggered – something that would be useful if my front door opened, regardless of where the camera is at home.

Finally, it would be helpful if Ring Alarm could see whether I was at home or not. In fact, there have been several cases where I forgot to activate it before leaving. Therefore, it would be nice if the app suggested to put it into vacation mode.

Affordable 24/7 home surveillance

The most attractive aspect of the ring alarm (second generation) is the affordable cost associated with its professional 24-hour home surveillance service. You must subscribe to Ring Protect Plus, which is $ 10 a month or $ 100 a year, but has the benefit of a real-time emergency response.

When an alarm is triggered, not only will you receive a notification on your smartphone, but a representative from Ring's professional surveillance service will call to check. From there, you can simply speak the verbal password to ignore the alarm or have emergency services sent to your home.

John Velasco / Digital Trends

The monthly cost of $ 10 for Ring Protect Plus also covers video history for all cameras connected to your Ring account for up to 60 days. In the event that the power supply fails at home, the base station has a 24-hour backup battery and a cellular service to continue the service. If you are heavily invested in the ring ecosystem, the cost is a bargain as this also includes professional monitoring.

Our opinion

With the ring alarm (2nd generation) you are protected in protecting your house – without having to cost an arm and a leg for a professional surveillance service. The five-part base kit costs $ 200 and the surveillance service costs $ 10 a month (or $ 100 a year). This makes it extremely competitive with other services that have both a higher initial investment and a higher monthly fee.

Is there a better alternative?

SimpliSafe is another do-it-yourself security service that needs to be considered due to its robust range of accessories. In addition to the usual sensors, SimpliSafe also offers a Smart Lock, special smoke and CO detectors, a key fob and a glass break sensor. SimpliSafe accessories are cheaper ($ 15 for an input sensor versus $ 20 for ring). To top it off, further settings and data protection regulations must be adjusted with SimpliSafe.

How long it will take?

Because the base station remains stationary and is in your home, it is unlikely to be damaged or need to be replaced. However, the sensors need to be replaced and the alarm keypad needs to be recharged occasionally unless you want to connect it to the power source.

Ring offers an extended warranty on all devices connected to your Ring Protect Plus subscription, so malfunctions due to defective parts or workmanship are covered until you stop service.

Should you buy it

Yes, especially if you are already invested in the ring ecosystem and want an affordable professional home surveillance service. If you already own the first generation model, there is little incentive to upgrade as the basic features and service remain the same.

Editor's recommendations